Efficient, versatile, lightweight & portable
Working platform design for aerial work
Special 3-in-1fiber holde
3 years warranty
Electrode life around 5000 times(Replaceable)
Automatic splicing & automatic heating
Innovatively tool-free of replacing electrodes
Support 220 times of splicing + heating when fully charged
| Splice Method | Active Clad-Alignment |
| Applicable Fibers | SM(ITU-T G.652&G.657)/MM(ITU-T G.651)/DS(ITU-T G.653)/NZDS(ITU-T G.655) |
| Compatible Fiber/Cable | 0.25~3.0 mm/indoor flat cable |
| Fiber Holder | Replaceable |
| Fiber Diameter | Cladding:80-150μm,Coating:100~1000μm |
| Fiber Cleave Length | 8~16 mm |
| Splice mode | Max 128 modes |
| Typical Splice Loss | SM:0.03dB/MM:0.01dB/DS:0.04dB/NZDS:0.04dB/G.657:0.03dB ★① |
| Return Loss | >>60dB |
| Splicing Time | SM Quick mode:8 sec/SM Average:10 Sec |
| Estimated Splice Loss | Available |
| Heating Time | Quick mode 18 sec. (SM G652250μm 40mm Sleeve)adjustable★② |
| Protection Sleeve Length | 20mm,30mm,40mm,50mm,60mm |
| Heat Programs | Max 32 modes |
| Battery | 4000mAh Battery Capacity,Typical 220 Cycles(Splice&Heat)per Charge ★③ |
| Electrode Life | 5000 arcs (replaceable) ★④ |
| Auto-start | Splice /Heating |
| Automatic Fiber Identification |
/ |
| Automatic ARC ldentification |
Automatic arc calibration by air pressure and temperature |
| Results Storage | The last 10,000 splice records and 2,000 result images |
| Tension Test | 1.96~2.25N |
| Operating Condition | Altitude:0~5000m,0~95%relative humidity,-20~50℃,Max Wind 15m/s |
| Storage Condition | 0~95%relative humidity,-20~60℃ |
| Display | 3.5”color high resolution(800×480)display |
| Fiber Magnification | X,Y,XY,X/Y:320X Magnification |
| Power Supply | AC100-240V~50/60Hz 2.0A,DC14.0V=4.0A |
| Terminal | USB2.0 |
| Weight | 1.06kg without battery/1.35kg with battery |
| Size | 130Hx113W×126D mm |
Language 
Phone: 
